{ "document": { "category": "csaf_security_advisory", "csaf_version": "2.0", "distribution": { "text": "© Copyright 2026 ABB. All rights reserved.", "tlp": { "label": "WHITE" } }, "lang": "en", "notes": [ { "category": "summary", "text": "B&R is aware of public reports of a vulnerability in the product versions listed as affected in the advisory.\n\nAn attacker who successfully exploited this vulnerability could cause the product to stop or insert and run arbitrary code.", "title": "Summary" }, { "category": "other", "text": "For additional instructions and support please contact your local B&R service organization. For contact information, see https://www.br-automation.com/en/about-us/locations/.\n\nInformation about ABB’s cyber security program and capabilities can be found at www.abb.com/cybersecurity.", "title": "Support" }, { "category": "legal_disclaimer", "text": "The information in this document is subject to change without notice, and should not be construed as a commitment by B&R.\n\nB&R provides no warranty, express or implied, including warranties of merchantability and fitness for a particular purpose, for the information contained in this document, and assumes no responsibility for any errors that may appear in this document. In no event shall B&R or any of its suppliers be liable for direct, indirect, special, incidental or consequential damages of any nature or kind arising from the use of this document, or from the use of any hardware or software described in this document, even if B&R or its suppliers have been advised of the possibility of such damages.\n\nThis document and parts hereof must not be reproduced or copied without written permission from B&R, and the contents hereof must not be imparted to a third party nor used for any unauthorized purpose.\n\nAll rights to registrations and trademarks reside with their respective owners.", "title": "Notice" }, { "category": "other", "text": "For any installation of software-related B&R products we strongly recommend the following (non-exhaustive) list of cyber security practices:\n\n- Isolate special purpose networks (e.g. for automation systems) and remote devices behind firewalls and separate them from any general-purpose network (e.g. office or home networks).\n- Install physical controls so no unauthorized personnel can access your devices, components, peripheral equipment, and networks.\n- Never connect programming software or computers containing programing software to any network other than the network for the devices that it is intended for.\n- Scan all data imported into your environment before use to detect potential malware infections.\n- Minimize network exposure for all applications and endpoints to ensure that they are not accessible from the Internet unless they are designed for such exposure and the intended use requires such.\n- Ensure all nodes are always up to date in terms of installed software, operating system, and firmware patches as well as anti-virus and firewall.\n- When remote access is required, use secure methods, such as Virtual Private Networks (VPNs). Recognize that VPNs may have vulnerabilities and should be updated to the most current version available. Also, understand that VPNs are only as secure as the connected devices.\n\nFor more information on recommended practices, please refer to the following documents listed in the reference section:\n\n- Defense in Depth for B&R products", "title": "General security recommendations" }, { "category": "other", "text": "B&R has a rigorous internal cyber security continuous improvement process which involves regular testing with industry leading tools and periodic assessments to identify potential product issues. Occasionally an issue is determined to be a design or coding flaw with implications that may impact product cyber security.\n\nWhen a potential product vulnerability is identified or reported, B&R immediately initiates our vulnerability handling process. This entails validating if the issue is in fact a product issue, identifying root causes, determining what related products may be impacted, developing a remediation, and notifying end users and governmental organizations.\n\nThe resulting Cyber Security Advisory intends to notify customers of the vulnerability and provide details on which products are impacted, how to mitigate the vulnerability or explain workarounds that minimize the potential risk as much as possible. The release of a Cyber Security Advisory should not be misconstrued as an affirmation or indication of an active threat or ongoing campaign targeting the products mentioned here. If B&R is aware of any specific threats, it will be clearly mentioned in the communication.\n\nThe publication of this Cyber Security Advisory is an example of B&R's commitment to the user community in support of this critical topic. Responsible disclosure is an important element in the chain of trust we work to maintain with our many customers. The release of an Advisory provides timely information which is essential to help ensure our customers are fully informed.", "title": "Purpose" }, { "category": "faq", "text": "Could the vulnerabilities be exploited remotely?\n- Yes, an attacker who has network access to an affected system node could exploit these vulnerabilities. Recommended practices include that process control systems are physically protected, have no direct connections to the Internet, and are separated from other networks by means of a firewall system that has a minimal number of ports exposed.\n\nWhat does the update do?\n- The update removes the vulnerabilities by applying a fixed OpenSSL version.\n\nWhen this security advisory was issued, had these vulnerabilities been publicly disclosed?\n- Yes, this vulnerability has been publicly disclosed.\n\nWhen this security advisory was issued, had B&R received any reports that these vulnerabilities were being exploited?\n- No, B&R had not received any information indicating that these vulnerabilities were exploited when this security advisory was originally issued.", "title": "Frequently asked questions" } ], "publisher": { "category": "vendor", "name": "ABB PSIRT", "namespace": "https://www.abb.com/global/en/company/about/cybersecurity/alerts-and-notifications" }, "references": [ { "category": "self", "summary": "B&R CYBERSECURITY ADVISORY - PDF Version ", "url": "https://br-cws-assets.de-fra-1.linodeobjects.com/SA26P003-8f937685.pdf" }, { "summary": "B&R CYBERSECURITY ADVISORY - CSAF Version ", "url": "https://psirt.abb.com/csaf/2026/sa26p003.json" }, { "summary": "Defense in Depth for B&R products ", "url": "https://www.br-automation.com/fileadmin/Cyber_Security_-_Defense_in_Depth_for_BR_Products-bdd37e82.pdf" } ], "title": "OpenSSL Vulnerabilities in B&R products", "tracking": { "current_release_date": "2026-11-09T00:30:00.000Z", "generator": { "date": "2026-11-09T10:11:27.891Z", "engine": { "name": "Secvisogram", "version": "2.6.17" } }, "id": "SA26P003", "initial_release_date": "2026-11-09T00:30:00.000Z", "revision_history": [ { "date": "2026-11-09T00:30:00.000Z", "legacy_version": "1.0", "number": "1", "summary": "Initial version." } ], "status": "final", "version": "1" } }, "product_tree": { "branches": [ { "branches": [ { "branches": [ { "category": "product_version_range", "name": "<6.6.0", "product": { "name": "B&R Industrial Automation GmbH mapp View <6.6.0", "product_id": "AV1" } }, { "category": "product_version", "name": "6.6.0", "product": { "name": "B&R Industrial Automation GmbH mapp View 6.6.0", "product_id": "FX1" } } ], "category": "product_name", "name": "mapp View" }, { "category": "product_name", "name": "Automation Runtime", "product": { "name": "B&R Industrial Automation GmbH Automation Runtime", "product_id": "NA1" } }, { "branches": [ { "category": "product_version_range", "name": "<3.0.2", "product": { "name": "B&R Industrial Automation GmbH B&R Live Utils <3.0.2", "product_id": "AV2" } }, { "category": "product_version", "name": "3.0.2", "product": { "name": "B&R Industrial Automation GmbH B&R Live Utils 3.0.2", "product_id": "FX2" } } ], "category": "product_name", "name": "B&R Live Utils" }, { "branches": [ { "category": "product_version_range", "name": "<1.1.1", "product": { "name": "B&R Industrial Automation GmbH B&R Linux 12 <1.1.1", "product_id": "AV3" } }, { "category": "product_version", "name": "1.1.1", "product": { "name": "B&R Industrial Automation GmbH B&R Linux 12 1.1.1", "product_id": "FX3" } } ], "category": "product_name", "name": "B&R Linux 12" }, { "branches": [ { "category": "product_version_range", "name": "<1.8.2", "product": { "name": "B&R Industrial Automation GmbH PPC80 <1.8.2", "product_id": "AV4" } }, { "category": "product_version", "name": "1.8.2", "product": { "name": "B&R Industrial Automation GmbH PPC80 1.8.2", "product_id": "FX4" } } ], "category": "product_name", "name": "PPC80" }, { "branches": [ { "category": "product_version_range", "name": "<1.8.0", "product": { "name": "B&R Industrial Automation GmbH PPT50 <1.8.0", "product_id": "AV5" } }, { "category": "product_version", "name": "1.8.0", "product": { "name": "B&R Industrial Automation GmbH PPT50 1.8.0", "product_id": "FX5" } } ], "category": "product_name", "name": "PPT50" }, { "branches": [ { "category": "product_version_range", "name": "<1.8.0", "product": { "name": "B&R Industrial Automation GmbH PPC50 <1.8.0", "product_id": "AV6" } }, { "category": "product_version", "name": "1.8.0", "product": { "name": "B&R Industrial Automation GmbH PPC50 1.8.0", "product_id": "FX6" } } ], "category": "product_name", "name": "PPC50" }, { "branches": [ { "category": "product_version_range", "name": "<1.8.2", "product": { "name": "B&R Industrial Automation GmbH PPT80 <1.8.2", "product_id": "AV7" } }, { "category": "product_version", "name": "1.8.2", "product": { "name": "B&R Industrial Automation GmbH PPT80 1.8.2", "product_id": "FX7" } } ], "category": "product_name", "name": "PPT80" }, { "branches": [ { "category": "product_version_range", "name": "<1.8.2", "product": { "name": "B&R Industrial Automation GmbH PFT51 <1.8.2", "product_id": "AV8" } }, { "category": "product_version", "name": "1.8.2", "product": { "name": "B&R Industrial Automation GmbH PFT51 1.8.2", "product_id": "FX8" } } ], "category": "product_name", "name": "PFT51" }, { "branches": [ { "category": "product_version_range", "name": "<1.8.0", "product": { "name": "B&R Industrial Automation GmbH PFT50 <1.8.0", "product_id": "AV9" } }, { "category": "product_version", "name": "1.8.0", "product": { "name": "B&R Industrial Automation GmbH PFT50 1.8.0", "product_id": "FX9" } } ], "category": "product_name", "name": "PFT50" }, { "branches": [ { "category": "product_version_range", "name": "<1.8.0", "product": { "name": "B&R Industrial Automation GmbH PPT30 <1.8.0", "product_id": "AV10" } }, { "category": "product_version", "name": "1.8.0", "product": { "name": "B&R Industrial Automation GmbH PPT30 1.8.0", "product_id": "FX10" } } ], "category": "product_name", "name": "PPT30" }, { "branches": [ { "category": "product_version_range", "name": "<1.8.0", "product": { "name": "B&R Industrial Automation GmbH Terminal OS <1.8.0", "product_id": "AV11" } }, { "category": "product_version", "name": "1.8.0", "product": { "name": "B&R Industrial Automation GmbH Terminal OS 1.8.0", "product_id": "FX11" } } ], "category": "product_name", "name": "Terminal OS" }, { "branches": [ { "category": "product_version_range", "name": "<6.9.0", "product": { "name": "B&R Industrial Automation GmbH PVI <6.9.0", "product_id": "AV12" } } ], "category": "product_name", "name": "PVI" }, { "branches": [ { "category": "product_version_range", "name": "<3.0.0", "product": { "name": "B&R Industrial Automation GmbH ADI OPC UA Server <3.0.0", "product_id": "AV13" } }, { "category": "product_version", "name": "3.0.0", "product": { "name": "B&R Industrial Automation GmbH ADI OPC UA Server 3.0.0", "product_id": "FX12" } } ], "category": "product_name", "name": "ADI OPC UA Server" }, { "category": "product_name", "name": "OPC UA C/S TP", "product": { "name": "B&R Industrial Automation GmbH OPC UA C/S TP", "product_id": "NA2" } } ], "category": "vendor", "name": "B&R Industrial Automation GmbH" } ] }, "vulnerabilities": [ { "cve": "CVE-2025-11187", "cwe": { "id": "CWE-476", "name": "NULL Pointer Dereference" }, "notes": [ { "category": "description", "text": "PBMAC1 parameters in PKCS#12 files are missing validation which can trigger a stack-based buffer overflow, invalid pointer or NULL pointer dereference during MAC verification. Impact summary: The stack buffer overflow or NULL pointer dereference may cause a crash leading to Denial of Service for an application that parses untrusted PKCS#12 files. The buffer overflow may also potentially enable code execution depending on platform mitigations. When verifying a PKCS#12 file that uses PBMAC1 for the MAC, the PBKDF2 salt and keylength parameters from the file are used without validation. If the value of keylength exceeds the size of the fixed stack buffer used for the derived key (64 bytes), the key derivation will overflow the buffer. The overflow length is attacker-controlled. Also, if the salt parameter is not an OCTET STRING type this can lead to invalid or NULL pointer dereference. Exploiting this issue requires a user or application to process a maliciously crafted PKCS#12 file. It is uncommon to accept untrusted PKCS#12 files in applications as they are usually used to store private keys which are trusted by definition. For this reason the issue was assessed as Moderate severity. The FIPS modules in 3.6, 3.5 and 3.4 are not affected by this issue, as PKCS#12 processing is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5 and 3.4 are vulnerable to this issue. OpenSSL 3.3, 3.0, 1.1.1 and 1.0.2 are not affected by this issue as they do not support PBMAC1 in PKCS#12.", "title": "CVE description" } ], "product_status": { "fixed": [ "FX1", "FX2", "FX3", "FX4", "FX5", "FX6", "FX7", "FX8", "FX9", "FX10", "FX11", "FX12" ], "known_affected": [ "AV1", "AV2", "AV3", "AV4", "AV5", "AV6", "AV7", "AV8", "AV9", "AV10", "AV11", "AV12", "AV13" ], "known_not_affected": [ "NA1", "NA2" ] }, "references": [ { "category": "external", "summary": "NVD - CVE-2025-11187", "url": "https://nvd.nist.gov/vuln/detail/CVE-2025-11187" } ], "remediations": [ { "category": "vendor_fix", "details": "The problem is corrected in the following product versions:\n\n- mapp View 6.6.0\n- B&R Live Utils 3.0.2\n- B&R Linux 12 1.1.1\n- PPC80 1.8.2\n- PPT50 1.8.0\n- PPC50 1.8.0\n- PPT80 1.8.2\n- PFT51 1.8.2\n- PFT50 1.8.0\n- PPT30 1.8.0\n- Terminal OS 1.8.0\n- ADI OPC UA Server 3.0.0\n\nB&R recommends that impacted customers apply the update at earliest convenience.\n\nThe process to install updates is described in the user manual. The step to identify the installed product version is described in the user manual.", "product_ids": [ "AV1", "AV2", "AV3", "AV4", "AV5", "AV6", "AV7", "AV8", "AV9", "AV10", "AV11", "AV13" ] }, { "category": "vendor_fix", "details": "The problem is corrected in the following product version:\n\n- PVI 6.9.0 (pending)\n\nB&R recommends that impacted customers apply the update at earliest convenience.\n\nThe process to install updates is described in the user manual. The step to identify the installed product version is described in the user manual.", "product_ids": [ "AV12" ] }, { "category": "mitigation", "details": "Customers are advised to review if their systems parse untrusted PKCS#12 files or CMS/PKCS#7 content, as standard TLS usage (e.g., HTTPS handshakes) typically does not trigger these issues.\n\nFor customers using OpenSSL solely for TLS (e.g., HTTPS or secure transport), exposure could be minimal since these vulnerabilities typically require processing specific certificate or signed data formats not involved in standard TLS handshakes.\n\nRefer to section \"General security recommendations\" for further advise on how to keep your system secure.", "product_ids": [ "AV1", "AV2", "AV3", "AV4", "AV5", "AV6", "AV7", "AV8", "AV9", "AV10", "AV11", "AV12", "AV13" ] } ], "scores": [ { "cvss_v3": { "attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 6.1, "baseSeverity": "MEDIUM", "confidentialityImpact": "LOW", "environmentalScore": 5.8, "environmentalSeverity": "MEDIUM", "integrityImpact": "LOW", "privilegesRequired": "LOW", "remediationLevel": "OFFICIAL_FIX", "scope": "UNCHANGED", "temporalScore": 5.8, "temporalSeverity": "MEDIUM", "userInteraction": "REQUIRED", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:L/I:L/A:H/RL:O", "version": "3.1" }, "products": [ "AV1", "AV2", "AV3", "AV4", "AV5", "AV6", "AV7", "AV8", "AV9", "AV10", "AV11", "AV12", "AV13" ] } ], "title": "CVE-2025-11187" }, { "cve": "CVE-2025-15467", "cwe": { "id": "CWE-787", "name": "Out-of-bounds Write" }, "notes": [ { "category": "description", "text": "Parsing CMS AuthEnvelopedData message with maliciously crafted AEAD parameters can trigger a stack buffer overflow. Impact summary: A stack buffer overflow may lead to a crash, causing Denial of Service, or potentially remote code execution. When parsing CMS AuthEnvelopedData structures that use AEAD ciphers such as AES-GCM, the IV (Initialization Vector) encoded in the ASN.1 parameters is copied into a fixed-size stack buffer without verifying that its length fits the destination. An attacker can supply a crafted CMS message with an oversized IV, causing a stack-based out-of-bounds write before any authentication or tag verification occurs. Applications and services that parse untrusted CMS or PKCS#7 content using AEAD ciphers (e.g., S/MIME AuthEnvelopedData with AES-GCM) are vulnerable. Because the overflow occurs prior to authentication, no valid key material is required to trigger it. While exploitability to remote code execution depends on platform and toolchain mitigations, the stack-based write primitive represents a severe risk. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the CMS implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3 and 3.0 are vulnerable to this issue. OpenSSL 1.1.1 and 1.0.2 are not affected by this issue.", "title": "CVE description" } ], "product_status": { "fixed": [ "FX1", "FX2", "FX3", "FX4", "FX5", "FX6", "FX7", "FX8", "FX9", "FX10", "FX11", "FX12" ], "known_affected": [ "AV1", "AV2", "AV3", "AV4", "AV5", "AV6", "AV7", "AV8", "AV9", "AV10", "AV11", "AV12", "AV13" ], "known_not_affected": [ "NA1", "NA2" ] }, "references": [ { "category": "external", "summary": "NVD - CVE-2025-15467", "url": "https://nvd.nist.gov/vuln/detail/CVE-2025-15467" } ], "remediations": [ { "category": "vendor_fix", "details": "The problem is corrected in the following product versions:\n\n- mapp View 6.6.0\n- B&R Live Utils 3.0.2\n- B&R Linux 12 1.1.1\n- PPC80 1.8.2\n- PPT50 1.8.0\n- PPC50 1.8.0\n- PPT80 1.8.2\n- PFT51 1.8.2\n- PFT50 1.8.0\n- PPT30 1.8.0\n- Terminal OS 1.8.0\n- ADI OPC UA Server 3.0.0\n\nB&R recommends that impacted customers apply the update at earliest convenience.\n\nThe process to install updates is described in the user manual. The step to identify the installed product version is described in the user manual.", "product_ids": [ "AV1", "AV2", "AV3", "AV4", "AV5", "AV6", "AV7", "AV8", "AV9", "AV10", "AV11", "AV13" ] }, { "category": "vendor_fix", "details": "The problem is corrected in the following product version:\n\n- PVI 6.9.0 (pending)\n\nB&R recommends that impacted customers apply the update at earliest convenience.\n\nThe process to install updates is described in the user manual. The step to identify the installed product version is described in the user manual.", "product_ids": [ "AV12" ] }, { "category": "mitigation", "details": "Customers are advised to review if their systems parse untrusted PKCS#12 files or CMS/PKCS#7 content, as standard TLS usage (e.g., HTTPS handshakes) typically does not trigger these issues.\n\nFor customers using OpenSSL solely for TLS (e.g., HTTPS or secure transport), exposure could be minimal since these vulnerabilities typically require processing specific certificate or signed data formats not involved in standard TLS handshakes.\n\nRefer to section \"General security recommendations\" for further advise on how to keep your system secure.", "product_ids": [ "AV1", "AV2", "AV3", "AV4", "AV5", "AV6", "AV7", "AV8", "AV9", "AV10", "AV11", "AV12", "AV13" ] } ], "scores": [ { "cvss_v3": { "attackComplexity": "LOW", "attackVector": "NETWORK", "availabilityImpact": "HIGH", "baseScore": 9.8, "baseSeverity": "CRITICAL", "confidentialityImpact": "HIGH", "environmentalScore": 9.4, "environmentalSeverity": "CRITICAL", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "remediationLevel": "OFFICIAL_FIX", "scope": "UNCHANGED", "temporalScore": 9.4, "temporalSeverity": "CRITICAL", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/RL:O", "version": "3.1" }, "products": [ "AV1", "AV2", "AV3", "AV4", "AV5", "AV6", "AV7", "AV8", "AV9", "AV10", "AV11", "AV12", "AV13" ] } ], "title": "CVE-2025-15467" } ] }